Telescopic Covers
GENERAL COVER
Made by certain width and length after compressing, the general cover is pulled bycontinuing slices putting together, connected by specially designed parts in order to havesufficient closing and moving.This range of products is suitable for machines which are with running speed less than 48m/min.
HIGH-SPEED COVER
Different from the general protecting cove by pulling flexible slices, this high speed covers could move the slices at the same time, with high steady speed, with low noise and less vibration so as to have longer use on the machines.
HIGH-SPEED COVER
Different from the general protecting cove by pulling flexible slices, this high speed covers could move the slices at the same time, with high steady speed, with low noise and less vibration so as to have longer use on the machines.
CUSTOMISED COVER
We also offer “customized” covers. Customers could have their own design so as to make the most use of the space, minimized the machine but with maximum processing platform and journey in it; for example: traditional type, asymmetric to carry type, or slope cover…etc.
CUSTOMISED COVER
We also offer “customized” covers. Customers could have their own design so as to make the most use of the space, minimized the machine but with maximum processing platform and journey in it; for example: traditional type, asymmetric to carry type, or slope cover…etc.
CUSTOMISED COVER
We also offer “customized” covers. Customers could have their own design so as to make the most use of the space, minimized the machine but with maximum processing platform and journey in it; for example: traditional type, asymmetric to carry type, or slope cover…etc.
东莞中部精密模具有限公司
地址:广东省东莞市万江区新和社区(帮凹村)
TEL:0769-87075939 FAX:0769-87075938 Email:cplaser@chungpu.com
TEL:0769-87075939 FAX:0769-87075938 Email:cplaser@chungpu.com
本公司是台湾中部激光股份有限公司，设在东莞的一家分公司，在台湾已有十八年的专业技术加工经验，有激光加工部、折床加工部.钣金焊接加工部。
激光部采用日本三菱激光切割机是激光发射器,将燃气体整合成0.25mm直线光速，经镜片传送切割能量，并由计算机控制移动切割，加工厚度为0.15-20mm，最大切割范围:3000*1500的多种材质（铁板、不锈钢板、压克力、木板、镀锌板、电解板、铝板与酸洗板等），直接切割精确度可达正负0.03mm；配合折弯、焊接、组装可以加工制造各种金属箱体(计算机机箱、仪器箱、控制箱)，也可切割精密的机械零件、电子机械零件与异形零件等，为您节省开模费用并抢得商机！！
激光部采用日本三菱激光切割机是激光发射器,将燃气体整合成0.25mm直线光速，经镜片传送切割能量，并由计算机控制移动切割，加工厚度为0.15-20mm，最大切割范围:3000*1500的多种材质（铁板、不锈钢板、压克力、木板、镀锌板、电解板、铝板与酸洗板等），直接切割精确度可达正负0.03mm；配合折弯、焊接、组装可以加工制造各种金属箱体(计算机机箱、仪器箱、控制箱)，也可切割精密的机械零件、电子机械零件与异形零件等，为您节省开模费用并抢得商机！！
車間環境
1F車間門口及出貨區
1F 雷射切割加工區
2F折彎區
2F折彎區及護罩生產線
2F洗油防鏽處理區
2F包裝及下料區
3F鈑金品檢區
3F鈑金焊接區
东莞中部精密模具有限公司